Dr. Abiodun Michael Adebimpe

Senior Lecturer | Faculty Examination Officer

Faculty of Engineering · Department of Mechatronic Engineering

Specialization Electrical power system and machine

Office: Department of Mechatronics Engineering, Ikole campus, Ikole-Ekiti

Phone: +2348062470796

Email: abiodun.adebimpe@fuoye.edu.ng

Biography

Engr. Dr. Adebimpe Abiodun Michael was born about five decades ago to the family of Mr and Mrs Omotilewa Adebimpe of Iludi quarters, Osi-Ekiti. He started the elementary education in 1983 at the Saint Paul’s Anglican Primary School, Osi-Ekiti and completed same in 1988. He was at the Osi Community High School, Osi-Ekiti between 1989 and 1994 for the secondary education. In the year 1997, he proceeded to the Osun State College of Technology, Esa-Oke for the National Diploma programme in Electrical and Electronic Engineering. Upon completion of the National Diploma programme, he proceeded to the Federal Polytechnic, Ado-Ekiti for the Higher National Diploma. He was at the Federal University of Technology, Akure for the postgraduate diploma in Electrical and Electronic Engineering between 2005 and 2007. He bagged master (M.Eng) and Doctor of Philosophy (PhD) of Electrical power system and machine degrees at the Ekiti State University, Ado-Ekiti in the year 2017 and 2024 respectively. He is a COREN registered Engineer and a member of the Nigerian Society of Engineers. He is happily married to Mrs Adebimpe Folasade and the union is blessed with children.

Research Interests

Renewable Energy, Power System Stability and Control, Power Electronics

Qualifications

• Doctor of Philosophy (PhD) Electrical power system and machine, Ekiti State University, Ado-Ekiti (2024)
• Master (M.Eng) Electrical power system and machine, Ekiti State University, Ado-Ekiti (2017)
• Postgraduate Diploma (PGD) Electrical and Electronic Engineering, Federal University of Technology, Akure (2007)

Selected Publications

1. Development of an Automatic Colour-Based Apple Sorting Machine
   Authors: Adebimpe, A. M., Uguru-Okorie, C. D., Aribisala, A. A., Sanni S.O. and Abiodun, J.T.
   Taraba Journal of Engineering and Technology (2025)
2. Design of an IoT-Based Control System for Intelligent Power Management of a Greenhouse
   Authors: Adebimpe, A. M., Uguru-Okorie, C. D., Oricha, J. Y., Aribisala, A. A., Olusuyi, K. O., Sanni, S. O. and Olorunmojo, G. O.
   Journal of Engineering, Technology and Innovation (2025)
3. Development of an Automated Potato Peeling Machine with Remote Control Capability
   Authors: Adebimpe, A. M., Uguru-Okorie, C. D., Aribisala, A. A., Olawale O. Ajibola, O. O. and Adeoti, A. J
   UNIABUJA Journal of Engineering and Technology (2025)
4. Performance evaluation of a smart biomass stove using charcoal as fuel with solar powered blower
   Authors: Daniel Uguru-Okorie, Kehinde Adisa and Abiodun Adebimpe
   Equity Journal of Science and Technology (2024)
5. Design of an Automated Coconut Dehusking Machine with Radio Frequency Control and Lead Screw Mechanism
   Authors: Adebimpe, A. M., Uguru-Okorie, C. D., Aribisala, A. A. and Lateef, A. K
   FUDMA Journal of Sciences (2024)
6. Development of an Internet of Things (IoT)-Based Solar Chilli Pepper Dryer
   Authors: Adebimpe, A. M., Uguru-Okorie, C. D., Akintaju, A. O. and Funmilayo, A. O
   Dutse Journal of Pure and Applied Sciences (2024)
7. Dynamic Impact of Hybrid Wind-Solar Photovoltaic Power Injection on Small Signal Stability of Nigerian 11 kV Power System using Self Organizing Map Neural Network
   Authors: A. M. Adebimpe, P. K. Olulope, B. O. Olajiga, E. A. Olajuyin, O. S. Adeoye
   Scientific African (2024)
8. Design and Production of an Automatic Solid Waste Sorting Machine with Smart Digital Counter
   Authors: A. M. Adebimpe, D. C. Uguru-Okorie and E. O. Oluwagunwa
   Nigerian Journal of Technology (2022)
9. Improvement of the Voltage Profile of 11 kV Power Network Using Capacitor Bank
   Authors: A. M. Adebimpe and P. K. Olulope
   FUW Trends in Science & Technology Journal (2022)
10. Design and Implementation of an Automated Hand Sanitizer Dispenser using Ultrasonic Sensor
    Authors: A. M. Adebimpe, D. C. Uguru-Okorie and A. D. Olojo
    Nigerian Journal of Engineering (2022)
11. Development of an Automated Bitter Leaf Processing Machine
    Authors: D. C. Uguru-Okorie., A. M. Adebimpe, T. O. Oni and P. Omoyemi
    Scientific African (2022)

Professional Qualification

• COREN Regd. Engineer - Council for the Regulation of Engineering in Nigeria (2012)

Membership of Professional Bodies

• Nigerian Society of Engineers - Corporate (2011)

Paper Presentation - Local

• A Review on Wearable Mechatronic Systems for Intelligent Health Analysis - IEEE international Conference on Science, Engineering and Business for Driving Sustainable development Goals, Landmark University, Omu-Aran (2025)
• AI-Guided Temperature Therapy Machine for Injury Rehabilitation: A Comprehensive Analysis Review - 3rd International Engineering Conference, Faculty of Engineering, Federal University Oye-Ekiti (2024)
• Validation of Automated Car Parking Problems and Traffic Management Measures - 1st International Mechatronics Conference, Federal University, Oye-Ekiti (2019)

Postgraduate M.Phil Supervision

• Ifuwe Israel Chukwuka - Development of an AI-Guided Temperature Therapeutic machine for Injury Rehabilitation (2025)

Undergraduate Project Supervision

• Adelakun Favour Adebayo - Design and Implementation of a Noise Pollution Monitoring and Alert System (2025)
• Arise Victor - Design and Implementation of a Digital Sliding Gate Using RFID Technology (2022)
• Oluwagunwa Emmanuel - Design and Production of an Automatic Solid Waste Sorting Machine with Smart Digital Counter (2022)
• Olojo Abiodun - Design and Implementation of an Automated Hand Sanitizer Dispenser using Ultrasonic Sensor (2022)
• Lateef Kehinde - Automated Coconut Dehusking Machine with Radio Frequency Control and Lead Screw Mechanism (2023)
• Adeoti Abodunrin - Development of an Automated Potato Peeling Machine with Remote Control Capability (2025)
• Olorunmojo Gideon - Design of an IoT-Based Control System for Intelligent Power Management of a Greenhouse (2024)
• Ali Ibrahim - Design and Implementation of an Energy Consumption Monitoring System (2024)
• Akintaju Olawale - Development of an Internet of Things (IoT)-Based Solar Chilli Pepper Dryer (2024)
• Igbintade Oluwatobi - Design and Implementation of Mosquito killer (2023)
• Fakayode Daniel - Design and Implementation of an Air Humidifier and Purifier (2023)

Course Teaching

• MTE 811 - Introduction to Mechatronics Engineering (2024/2025 First semester)
• MTE 812 - Electronic Devices and Circuits (2024/2025 Second semester)
• MTE 513 - Power Electronics & Drives (2025/2026 First semester)
• MTE 512 - Microcomputers and Embedded Systems (2021/2022 First semester)
• MTE 411 - Digital System and PLCs (2024/2025 First semester)
• MTE 311 - Mechatronics System Design I (2021/2022 First semester)
• MTE 310 - Physical Electronics (2025/2026 Second semester)
• ENG 301 - Engineering Mathematics III (2020/2021 First semester)
• MCE 101 - Introduction to Mechatronics Engineering (2024/2025 First semester)

Professional Skill

Photo Gallery / Picture Evidence