Council for the Regulation of Engineering in Nigeria
Dr. Abiodun Michael Adebimpe
Senior Lecturer
Department of Mechatronic Engineering, Faculty of Engineering
Area of Specialization: Electrical power system and machine
Biography
Engr. Dr. Adebimpe Abiodun Michael was born about five decades ago to the family of Mr and Mrs Omotilewa Adebimpe of Iludi quarters, Osi-Ekiti. He started the elementary education in 1983 at the Saint Paul’s Anglican Primary School, Osi-Ekiti and completed same in 1988. He was at the Osi Community High School, Osi-Ekiti between 1989 and 1994 for the secondary education. In the year 1997, he proceeded to the Osun State College of Technology, Esa-Oke for the National Diploma programme in Electrical and Electronic Engineering. Upon completion of the National Diploma programme, he proceeded to the Federal Polytechnic, Ado-Ekiti for the Higher National Diploma. He was at the Federal University of Technology, Akure for the postgraduate diploma in Electrical and Electronic Engineering between 2005 and 2007. He bagged master (M.Eng) and Doctor of Philosophy (PhD) of Electrical power system and machine degrees at the Ekiti State University, Ado-Ekiti in the year 2017 and 2024 respectively. He is a COREN registered Engineer and a member of the Nigerian Society of Engineers. He is happily married to Mrs Adebimpe Folasade and the union is blessed with children.
Research Interests
Renewable Energy, Power System Stability and Control, Power Electronics
Qualifications
| Degree | Institution | Year |
|---|---|---|
| Doctor of Philosophy (PhD) Electrical power system and machine | Ekiti State University, Ado-Ekiti | 2024 |
| Master (M.Eng) Electrical power system and machine | Ekiti State University, Ado-Ekiti | 2017 |
| Postgraduate Diploma (PGD) Electrical and Electronic Engineering | Federal University of Technology, Akure | 2007 |
Professional Qualification
Membership of Professional Bodies
Corporate
Paper Presentation - Local
IEEE international Conference on Science, Engineering and Business for Driving Sustainable development Goals, Landmark University, Omu-Aran
3rd International Engineering Conference, Faculty of Engineering, Federal University Oye-Ekiti
1st International Mechatronics Conference, Federal University, Oye-Ekiti
Postgraduate M.Phil Supervision
Development of an AI-Guided Temperature Therapeutic machine for Injury Rehabilitation
Undergraduate Project Supervision
Design and Implementation of a Noise Pollution Monitoring and Alert System
Design and Implementation of a Digital Sliding Gate Using RFID Technology
Design and Production of an Automatic Solid Waste Sorting Machine with Smart Digital Counter
Design and Implementation of an Automated Hand Sanitizer Dispenser using Ultrasonic Sensor
Automated Coconut Dehusking Machine with Radio Frequency Control and Lead Screw Mechanism
Development of an Automated Potato Peeling Machine with Remote Control Capability
Design of an IoT-Based Control System for Intelligent Power Management of a Greenhouse
Design and Implementation of an Energy Consumption Monitoring System
Development of an Internet of Things (IoT)-Based Solar Chilli Pepper Dryer
Design and Implementation of Mosquito killer
Design and Implementation of an Air Humidifier and Purifier
Course Teaching
Introduction to Mechatronics Engineering
Electronic Devices and Circuits
Power Electronics & Drives
Microcomputers and Embedded Systems
Digital System and PLCs
Mechatronics System Design I
Physical Electronics
Engineering Mathematics III
Introduction to Mechatronics Engineering
Professional Skill
General electrical installation
Selected Publications
Development of an Automatic Colour-Based Apple Sorting Machine
Authors: Adebimpe, A. M., Uguru-Okorie, C. D., Aribisala, A. A., Sanni S.O. and Abiodun, J.T.
Taraba Journal of Engineering and Technology • 2025
Open publicationDesign of an IoT-Based Control System for Intelligent Power Management of a Greenhouse
Authors: Adebimpe, A. M., Uguru-Okorie, C. D., Oricha, J. Y., Aribisala, A. A., Olusuyi, K. O., Sanni, S. O. and Olorunmojo, G. O.
Journal of Engineering, Technology and Innovation • 2025
Open publicationDevelopment of an Automated Potato Peeling Machine with Remote Control Capability
Authors: Adebimpe, A. M., Uguru-Okorie, C. D., Aribisala, A. A., Olawale O. Ajibola, O. O. and Adeoti, A. J
UNIABUJA Journal of Engineering and Technology • 2025
Open publicationPerformance evaluation of a smart biomass stove using charcoal as fuel with solar powered blower
Authors: Daniel Uguru-Okorie, Kehinde Adisa and Abiodun Adebimpe
Equity Journal of Science and Technology • 2024
Open publicationDesign of an Automated Coconut Dehusking Machine with Radio Frequency Control and Lead Screw Mechanism
Authors: Adebimpe, A. M., Uguru-Okorie, C. D., Aribisala, A. A. and Lateef, A. K
FUDMA Journal of Sciences • 2024
Open publicationDevelopment of an Internet of Things (IoT)-Based Solar Chilli Pepper Dryer
Authors: Adebimpe, A. M., Uguru-Okorie, C. D., Akintaju, A. O. and Funmilayo, A. O
Dutse Journal of Pure and Applied Sciences • 2024
Open publicationDynamic Impact of Hybrid Wind-Solar Photovoltaic Power Injection on Small Signal Stability of Nigerian 11 kV Power System using Self Organizing Map Neural Network
Authors: A. M. Adebimpe, P. K. Olulope, B. O. Olajiga, E. A. Olajuyin, O. S. Adeoye
Scientific African • 2024
Open publicationDesign and Production of an Automatic Solid Waste Sorting Machine with Smart Digital Counter
Authors: A. M. Adebimpe, D. C. Uguru-Okorie and E. O. Oluwagunwa
Nigerian Journal of Technology • 2022
Open publicationImprovement of the Voltage Profile of 11 kV Power Network Using Capacitor Bank
Authors: A. M. Adebimpe and P. K. Olulope
FUW Trends in Science & Technology Journal • 2022
Open publicationDesign and Implementation of an Automated Hand Sanitizer Dispenser using Ultrasonic Sensor
Authors: A. M. Adebimpe, D. C. Uguru-Okorie and A. D. Olojo
Nigerian Journal of Engineering • 2022
Open publicationDevelopment of an Automated Bitter Leaf Processing Machine
Authors: D. C. Uguru-Okorie., A. M. Adebimpe, T. O. Oni and P. Omoyemi
Scientific African • 2022
Open publication