Council for the Regulation of Engineering (COREN)
FUOYE Academic Staff Profile
Prof. Olawale Olarewaju AJIBOLA
Professor
Department of Materials and Metallurgical Engineering, Faculty of Engineering
Area of Specialization: Materials and Metallurgical Engineering (Materials Development and Surface Engineering)
Biography
Prof. Olawale Olarewaju Ajibola is an accomplished academic, researcher, and Materials and Metallurgical Engineer with over two decades of experience in teaching, research, innovation, and professional service. He holds B.Eng., M.Eng and Ph.D. in Metallurgical and Materials Engineering with specialization in Corrosion Engineering from the Federal University of Technology, Akure (FUTA),
He further broadened his international research profile through postdoctoral research at the University of Johannesburg, South Africa. Currently a faculty member in the Department of Materials and Metallurgical Engineering at the Federal University Oye-Ekiti (FUOYE). He has made significant contributions to engineering education through teaching, curriculum development, laboratory establishment, and the supervision of numerous undergraduate and postgraduate research projects. His mentorship has inspired many young engineers and researchers to pursue excellence in academia and industry.
His research focuses on surface engineering (corrosion, tribology and coating), advanced engineering materials development and characterization, mineral processing and extractive metallurgy. He has led and contributed to the design and fabrication of engineering equipment and has published extensively in reputable peer-reviewed journals, with his work advancing knowledge in wear behaviour, materials performance, powder metallurgy, additive metallurgy, titanium-based composites, and sustainable materials development.
Beyond research, He has actively served the engineering profession through departmental, faculty, and university committees, while participating in national and international collaborations that promote innovation and capacity building. His commitment to excellence, integrity, lifelong learning, and professional development has earned him recognition as a respected scholar, mentor, and leader in Materials and Metallurgical Engineering.
Prof. Olawale O. Ajibola remains passionate about developing innovative engineering solutions, mentoring the next generation of engineers, and advancing research that contributes to sustainable industrial and technological development in Nigeria and beyond.
Research Interests
Metallurgical and Materials Engineering;
Surface Engineering (Corrosion, Tribology and Coating), Advanced Engineering Materials Development and Characterization, Mineral Processing and Extractive Metallurgy.
Qualifications
| Degree | Institution | Year |
|---|---|---|
| Doctor of Philosophy (Ph.D.) Metallurgical and Materials Engineering | The Federal University of Technology, Akure (FUTA) | 2015 |
| Master of Engineering (M.Eng.) Metallurgical and Materials Engineering | The Federal University of Technology, Akure (FUTA) | 2008 |
| Bachelor of Engineering (B.Eng.) Metallurgical and Materials Engineering | The Federal University of Technology, Akure (FUTA) | 1995 |
Professional Qualification
Awards
FEBE, University of Johannesburg, South Africa
Membership of Professional Bodies
Corporate Member, MNSE
Corporate Member (MNMS)
iii. Professional Member, (MMSN)
Paper Presentation - Local
Nigerian Materials Congress 2002 (NIMACON-2002) of the Materials Society of Nigeria, EMDI, Akure
Nigerian Materials Congress 2002 (NIMACON-2002) of the Materials Society of Nigeria, EMDI, Akure
3rd International Conference on Engineering Innovations as a Catalyst for Rapid Economic Growth (COLENG 2021), Federal University of Agriculture, Abeokuta, Nigeria
3rd International Conference on Engineering Innovations as a Catalyst for Rapid Economic Growth (COLENG 2021), Federal University of Agriculture, Abeokuta, Nigeria
35th annual conference of the Nigerian Metallurgical Society, Ilorin Kwara State
Paper Presentation - International
Lead-Zinc Conference (Pb-Zn 2015) on Modern Processes and Future Development. , Dusseldorf, Germany.
Inaugural African Corrosion Congress (AfriCORR 2014) and Exhibition, Pretoria, South Africa
14th Global Congress on Manufacturing and Management (GCMM-2018), Brisbane, Australia,
14th Global Congress on Manufacturing and Management (GCMM-2018), Brisbane, Australia,
14th Global Congress on Manufacturing and Management (GCMM-2018), Brisbane, Australia,
4th International Conference on Energy Materials and Applications (ICEMA 2019), University of Aveiro, Aveiro, Portugal
4th International Conference on Energy Materials and Applications (ICEMA 2019), University of Aveiro, Aveiro, Portugal
4th International Conference on Energy Materials and Applications (ICEMA 2019), University of Aveiro, Aveiro, Portugal
Postgraduate Ph.D Supervision
Development of Binderless Ultra-Tough Titanium Carbonitride (TiCN) using Spark Plasma Sintering Technique. [University of Johannesburg (UJ), South Africa]
Fabrication of high temperature Al2O3 matrix composites produced from the Southwestern Nigeria kaolin deposits using developed extractor and Sintering furnace. [, Federal University Oye Ekiti. ]
Development of corrosion resistant high pressure materials for cryogenic applications in corrosive environments [Federal University of Technology, Akure]
Postgraduate M.Sc Supervision
The effect of graphite on the tribological properties of pure titanium carbonitride (TiCN). [University of Johannesburg]
Ambient temperature creep behaviour of Spark Plasma Ti-6Al-4V/TiN composites. [University of Johannesburg]
Development, Characterization and Corrosion Study of Al2O3-SiC-Gr Hybrid 6063 Aluminium Alloy Matrix Composite in Sea Water Environment
Undergraduate Project Supervision
Bioleaching of zinc using cassava extract
Optimization and characterisation of aluminium 6063 alloy reinforced with titanium dioxide nanoparticles
Optimization and characterization of polymer-ceramic (epoxy-TiO2) and ceramic-polymer (TiO2-epoxy) nanocomposites
Optimisation and characterisation of polymer-metal composites and polymer-ceramic nano-composites
Corrosion behaviour of 6063 aluminium alloy reinforced with ceramic nano-particles (in low concentration media)
Corrosion study of 6063 aluminium alloy reinforced with ceramic nano-particles (in high concentration media)
Characterization of Aluminium titania nanocomposite
Mechanical behaviours of Aluminium nano-titania composite
Characterization of age-hardened Aluminium nanotitania composite
Effects of reinforcement and SMAW/Stick Welding parameter on the HAZ of Aluminium nano-titania composite
Corrosion and Characterization of Aluminium nanotitania composite in H2SO4 media
Design of plant layout for bessemer converter and crap yard
Construction of plant layout for bessemer converter and crap yard
Design of basement and installation of bessemer converter
The investigation of dry sliding loads on the frictional wear of of AA6063-TiO2 nano-composites
The microstructural investigation of sliding loads variation on the mode of wear of AA6063-TiO2 nano-composites
Course Teaching
Foundry Technology II
Engineering Materials
Students Industrial Work Experience I
Students Industrial Work Experience I
Foundry Technology II
Engineering Metallurgy
Materials Joining Technology
Materials and Metallurgical Laboratory III
Corrosion Engineering
Foundry Technology II
Engineering Metallurgy
Materials Joining Technology
Materials and Metallurgical Laboratory III
Mineral Processing
Professional Skill
Certificate of competence metal and machine fabrications
Custom Fields
Leadership Roles
Deputy Director of Christian Education, CAC Students Association
Selected Publications
Design and Fabrication of Variable Speed Abrasive Grinding and Polishing Machine for Metallographic Sample Preparation.
Authors: Adebayo, A.O., Borisade S.G., Ajibola O.O., Owa, A.F., Falemu A.G, Omoyeni D.O., Olugbemi E.M, Oyetunji S.O, Oyinloye A.D, Barnabas A.A.
Nigerian Journal of Engineering. Vol. 30, No. 2, pg 10-18. • 2923
Influence of Nano-TiO₂ Reinforcement Percentage on the Electrochemical and Morphological Corrosion Behaviour of Cold Work Aluminium Composites
Authors: Audu, Y., Ajibola, O. O., Ajah, O., and Alabi, T. A.
Journal of Metastable and Nanocrystalline Materials, 43, 53–65. • 2026
Open publicationDevelopment of an Automated Potato Peeling Machine with Remote Control Capability.
Authors: Abiodun M. ADEBIMPE, Daniel C. UGURU-OKORIE, Adetoye A. ARIBISALA, Olawale O. AJIBOLA and Abodunrin J. ADEOTI
UNIABUJA Journal of Engineering and Technology, Volume 2, Issue 1, 2025; 217-223 • 2025
Development of an Automated Laboratory Size Multi-Deposition Plant Prototype
Authors: O.O. Ajibola, A.O. Adebayo, O.D. Adigun, S.G. Borisade, T.P. Dada, D.T. Adeniyi, Y. Audu, Dada O. Omoyeni, F.O. Kolawole, O.O. Ige, O.E Falodun, A.M. Adebimpe, O.O. Martins, B.J. Olorunfemi, K.A Bello, L.O. Onadiran, O.M Olaniyan.
Adeleke University Journal of Engineering and Technology [AUJET] Vol. 7, No 2, 334-348. • 2024
Electrochemical Corrosion Behaviour of Heat-Treated AA6063 Aluminium Matrix Composites Reinforced with Alumina, Titania and Hybrid Powders in 1.0M HCl Solution
Authors: O.O. Ajibola, A.O. Adebayo, S.G Borisade, O.D Adigun and B.A. Babalola
. FUOYE Journal of Pure and Applied Sciences (FJPAS) Vol 9. No (3), 2024 pg 130-146 • 2024
Development and Corrosion Behaviour of 6063 Aluminium Alloy Matrix Reinforced with Ceramic (TiO2) Nano-Particles in HCl Solution Environments
Authors: Ajibola, O.O., Adebayo, A.O., Borisade, S.G., Adigun, O.D., & Babalola, B.A.
FUOYE Journal of Pure and Applied Sciences (FJPAS) Vol 9. No (3), 2024 pg 29-45 • 2024
Open publicationFrictional Properties of Cast Al-Si-Cu-Zn Alloy in DOT4 Fluid.
Authors: Ajibola, O. O., Adebayo, A. O., Falodun, O. E., Olubambi. P. A.
UniOsun Journal of Engineering and Environmental Sciences. Vol. 6 No. 2. 2024, pg 201-214 • 2024
Open publicationDesign and Fabrication of Laboratory Size 100kg Charge Bottom Fed Oxygen Steel Converter Shell with Gear Tilting Mechanism
Authors: Ajibola, O. O., Adebayo, A. O., Borisade, S. G., Owa, A. F., Adigun, O. D., Adeniyi, E., Faronbi, J., Jeje, A., Yekeen, R., Omoyeni, D. O., Kolawole, F.O.,
UniOsun Journal of E • 2024
Open publicationMechanical Properties of Aluminium Alloys produced using different Stir-Cast Stirring Rates
Authors: Adigun, O., Aribisala, A.A., Adigun, A.R., Olusunle, S.O., Ajibola, O.O., Owa, A.F., Isadaro, A.D., Madueke, C.I., Abegunde, I.E., and Omonubi, K.B.
”, Nigerian Journal of Technology, 2024; 43(3), pp. 464 – 469 • 2024
Open publicationEffects of chemical treatment on constituents, tensile strength and microstructural characteristics of natural fibers,
Authors: Borisade, S. G., Oladele, I. O., Owoeye, S. S., Akinbamiyorin, I. M., Ajibola, O. O., Umunakwe, R., Borisade, M. S.,
Environmental Sciences. Vol.6 No.1., 202-212 ISSN:2782-8425 • 2024
Open publicationDesign and Fabrication of Oil-Diesel Fired Crucible Pot Furnace
Authors: Adebayo, A.O., Ajibola O.O., Borisade S.G., Kolawole F.O, Umunakwe R., Adigun O.D, Omoyeni D.O., Oke Y.A, Ebeku N., Shittu I.O
Nigerian Journal of Engineering. Vol. 31, No. 2, August 2024, pg 46-54. • 2024
Impact of Chemical Treatments on the Mechanical Properties and Morphological Characteristics of Sisal (Agave sisalana).
Authors: Borisade S.G., Oladele I.O., Adebayo A.O., Ajibola O. O., Adigun O. D and Borisade M.S.
Journal of Researches in Agricultural Sciences (JRAS). Vol. 11(1), March 2023, pp 18-23. • 2023
The Effect of TiN-TiB2 on the Microstructure, Wear, and Nanoindentation Behavior of Ti6Al4V-Ni-Cr Matrix Composites.
Authors: Falodun O.E, Oke S.R, Akinwamide S.O, Ajibola O.O., Adebayo, A.O., Borisade S.G., Adediran A.A, and Olubambi P.A.
Journal of Materials Engineering and Performance (JMEPEG). 2023, 32(12), 5566–5575 • 2023
Open publicationDevelopment of aerated and mechanically agitated froth flotation machine.
Authors: Ajibola O.O., Adebayo A.O., Borisade S.G., Abubakar A.F., Oguntade K.V., Omoyeni D.O.,
FUW Trends in Science & Technology Journal, 2022: Vol. 7 No. 1, pp 312-327. • 2022
Design and fabrication of combined electromagnetic and magnetic drum-belt conveyor separator
Authors: Ajibola O.O., Adebayo A.O., Borisade S.G., Oladimeji H.T., Oluwalana E., Daramola M.P., Adeleke A.E, Omoyeni D.O.,
LAUTECH Journal of Engineering and Technology 2021 15 (2) 2021: 49-59. • 2021
Design and fabrication of multi-purpose mineral leaching equipment
Authors: Ajibola O.O., Borisade S.G., Adebayo A.O., Owa A.F., Adigun O.D., Oni O.O., Akanni P.E., Oni A., Omoyeni D.O., Fagbohungbe A.T., Umunakwe R., Kolawole F.O.
FUDMA Journal of Sciences (FJS), Vol. 5 No. 2, June, 2021, pp 295-309 • 2021
Open publicationChemical and mechanical properties of low carbon steel: Insight from process parameters.
Authors: Borisade S. G; Ajibola O.O; Owa A. F; Adebayo A. O,
LAUTECH Journal of Engineering and Technology. 2021,15(1) pgs 39-44 • 2021
Fabrication and performance evaluation of electroless-nickel deposition line for metal alloys and plastic substrates.
Authors: Ajibola O.O, Adebayo A.O, Akipeloye S., Oladimeji V., Oyekanmi A., Ogungbe G., Omoyeni D.O, Borisade S.G, Oloruntoba D.T, Adewuyi B.O.
FUW Trend in Science and Technology Journal (FTSTJ) 2021, Vol. 6 No. 1 pp. 069 – 078 • 2021
Erosion wear behavior of spark plasma-sintered Ti-6Al-4V reinforced with TiN nanoparticles
Authors: Kganakga M.G., Prieto G., Falodun O.E., Tuckart W.R., Obadele B.A, Ajibola O.O, Olubambi P.A.
The International Journal of Advanced Manufacturing Technology (2020) 110:3051–3060. • 2020
Open publicationDirect Bioleaching of Zinc using Manihot Esculenta Crantz (Cassava) Extract Without Additives
Authors: Ajibola, O. O., Adebayo, A. O., Borisade, S. G., Adegbenro, A. E., Oloruntoba, D. T. and Olubambi, P. A.
FUDMA Journal of Sciences (FJS). Vol. 4 No. 2, June, 2020, pp 645 – 657 • 2020
Open publicationDesign and fabrication of a multi-purpose homogenizer.
Authors: Ajibola O.O, Alamuoye O.F, Omoyeni D.O., Adebayo A.O., Borisade S.G., Olotu V., Adetoye O., Adebanji S,
NIPES Journal of Science and Technology Research, 2020, Vol. 2 (3). 21-35. • 2020
Computer aided modelling of the impact of irregular power supply on machining foundry products
Authors: Owa A.F, Adesina F., Ajibola O.O,
FUOYE Journal of Engineering and Technology (FUOYEJET), 2020-5-2-165-170. • 2020
Corrosion performance of low carbon steel in sulphide medium using Thevetia Peruviana as inhibitor
Authors: Owa A.F, Adebayo A.O, Ajibola O.O, Adigun O.D, Borisade S.G, Adesina F.,
Journal of Engineering and Engineering Technology (FUTAJEET), 2020-14-2-149-155. • 2020
Tribological and Mechanical behaviours of nanostructured aluminium alloys and nanocomposites at elevated temperatures: A short review
Authors: Ajibola O.O, Owa A.F, Adebayo A.O, Borisade S.G, Adigun O.D
FUOYE Journal of Engineering and Technology (FUOYEJET), Volume 4, Issue 3, pp 43-48. • 2020
Open publicationA review on the prospect for the development of nanostructured and nanocomposite aluminium-alloyed austempered ductile iron.
Authors: Adebayo A.O, Owa A.F, Ajibola O.O, Borisade S.G, Adigun O.D, Kolawole F.O.
FUOYE Journal of Engineering and Technology (FUOYEJET), Volume 4, Issue 3, pp 35-38. • 2020
Open publicationCharacterization and heat diffusion characteristics of spark plasma sintered Ni–50%Fe sintered alloy.
Authors: M.B. Shongwe, O.O. Ajibola, M.E. Masonyaneng, M. M. Ramakokovhu, P. A. Olubambi.
Jordan Journal of Mechanical and Industrial Engineering. Vol. 13, No. 1, 2019., pp 61 - 67. ISSN 1995-6665 • 2019
Sintering of binderless TiN and TiCN-based cermet for toughness applications: Processing techniques and mechanical properties: A review.
Authors: O.J. Akinribidea, B.A. Obadele, S.O. Akinwamide, H. Bilal, O.O. Ajibola, O.O. Ayeleru, S.P. Ringer, P.A. Olubambi.
Ceramics International 45 (2019) 21077–21090 • 2019
Exploring the sintering process parameters on erosion-corrosion characteristics of Fe-Cr-Ni steels in artificial mine water
Authors: O.O. Ige, S.R. Oke, M.R. Mphahlele, S. Aribo, B.A. Obadele, S.S. Lephuthing, J.O. Olawale, O.O. Ajibola, A.A. Daniyan, P.A. Olubambi.
Tribology International 138 (2019) 79–88. • 2019
Microstructural and phase evolution of spark plasma sintering of graphitized Ti (C0.9N0.1) composites
Authors: O.J Akinribide, G.N Mekgwe, B.A Obadele, O.O Ajibola, S.O Akinwamide, P.A Olubambi
International Journal of Refractory Metals & Hard Materials 78 (2019): 164–169. • 2019
The effects of particle size distribution and sintering conditions on bending strength of sintered Ni-30%Fe Alloy
Authors: M.B. Shongwe, O.O. Ajibola, M.M. Ramakokovhu, P.A. Olubambi
International Journal of Engineering & Technology (IJET-UAE), 7 (3) (2018): 1581-1584. • 2018
Comparative effects of corrosive wear on electroless-nickel plated A6061 alloys in DOT3 brake Fluid
Authors: O.O. Ajibola, P A. Olubambi
International Journal of Engineering & Technology (IJET-UAE), 7 (2) (2018): 927-934. • 2018
Effects of ternary metal additions on corrosion of spark plasma sintered Ni-Fe alloys in H2SO4 and NaCl
Authors: M.B Shongwe, I.M Makena, O.O Ajibola, P.A Olubambi, F.V Adams
Bulletin of Chemical Society of Ethiopia. 2018, 32(2): 337-349. ISSN:1726-801X • 2018
Wear and Corrosion of Wrought A6061 Aluminium Alloy in DOT3 Brake Fluid
Authors: O O. Ajibola, O O. Ige, P A. Olubambi
International Journal of Engineering & Technology (IJET-UAE), 7 (2) (2018) 512-519. • 2018
Engineering characterization of Oro Descanso underground gold mine deposit in Placetas, Cuba
Authors: Oluwaseyi A.O, and Ajibola O.O.
FUOYE Journal of Engineering and Technology, Vol 2, Iss 2, pp 12-16. • 2017
Influence of independent variables on the mechanical properties of rolled carbon steel
Authors: Adebayo A. O. and Ajibola O.O.
FUW Trend in Science and Technology Journal (FTSTJ) Vol 2 No 1A, pp 1-6. • 2017
Estimation of serpentinite rock mass strength of Placetas - Cuba underground gold mine deposit
Authors: Oluwaseyi A.O, and Ajibola O.O.
FUOYE Journal of Engineering and Technology, Vol 2, Iss 1, pp89-94. • 2017
Evaluation of electroless-nickel plated polypropylene under thermal cycling and mechanical tests.
Authors: Ajibola O.O
Tribology in Industry, Vol. 38, No. 3, pp412-424 • 2016
Corrosion of NST60Mn and NST50 steels electroplated with copper in selected water environments
Authors: Ajibola O., Komolafe D., Olorunfemi B.
FUOYE Journal of Engineering and Technology, Vol 1, Iss 1, pp 67-74 • 2016
Investigation of corrosion of cast aluminium alloy piston in brake fluid
Authors: Ajibola O.O, Oloruntoba D. T, Adewuyi B.O
African Corrosion Journal, 2016, Vol. 2. No 2, pp 1-11 • 2016
Comparative study of water lily (Nymphaeaceae) extracts on corrosion of low and medium carbon steel in a mild environment
Authors: Oloruntoba D.T, Talabi H.K, Ajibola O.O. (2015)
Acta Tehnica Corviniensis – Bulletin of Engineering Tome VIII [2015] Fascicule 4 [October – December] Faculty of Engineering - Hunedoara, University Politehnica Timisoara • 2015
Effect of polishing grits, temperatures and selected activators on electroless-nickel deposition on cast aluminium substrates
Authors: Ajibola O.O, Oloruntoba D. T, Adewuyi B.O
The Institution of Engineers, Malaysia, Vol. 76, No. 1, Jul 2015: 38-46. • 2015
Open publicationCorrosion of heat treated Electroless-Ni plated mild carbon steels in dilute H2SO4
Authors: Ajibola O.O, Adebayo A.O,, Oloruntoba D.T
International Journal of Materials Science and Applications. 2015; 4(5): 333-342, • 2015
Open publicationGeometallurgical evaluation of Itapa Ekiti feldspathic-biotite ore deposit for effective processing and extraction
Authors: Ajibola O.O, Boluwade E.A, Borisade S.G
International Journal of Mining Engineering and Mineral Processing 2015, 4(1): 1-7 • 2015
Open publicationCorrosion of copper plated NST60Mn and NST50 steels in NaCl, H2SO4 and NaOH solutions.
Authors: Ajibola O.O, Kolawole F., Adebayo A.O.
Der Chemica Sinica, 2015, 6(8):1-8 • 2015
Suitability of selected sand mine in Akure, Nigeria for use as foundry sands in aluminium alloy casting
Authors: Jimoh B.O., Ajibola O.O., Borisade S.G
International Journal of Engineering and Technology, August, 2015. Volume 5 No. 8, 485-495 • 2015
Investigation of corrosion of cast aluminium alloy piston in brake fluid.
Authors: Ajibola O.O,, Oloruntoba D. T, Adewuyi B.O,
African Corrosion Journal, Vol. 2. October, 2015. • 2015
Effect of processing parameters on the protective quality of Electroless-Ni on cast aluminium alloy
Authors: Ajibola O.O,, Oloruntoba D. T., Adewuyi B.O, (2015)
Journal of Metallurgy, Volume 2015, Article ID 386347, 13 pages. • 2015
Open publicationEffect of MgFeSi inoculant on properties of Cast 6061 Al Alloy for brake master piston application
Authors: Ajibola O.O., Oloruntoba D.T
Indian Journal of Materials Science, Volume 2015, Article ID 756219. 10 pages. • 2015
Open publicationWear and corrosion of cast Al alloy piston with and without brake oil
Authors: Ajibola O.O., Oloruntoba D.T.
Indian Journal of Materials Science, Volume 2015, Article ID 763618, 10 pages. • 2015
Open publicationEffects of moulding sand permeability and pouring temperatures on properties of cast 6061 Aluminium alloy
Authors: Ajibola O.O,, Oloruntoba D. T, Adewuyi B.O
International Journal of Metals, Volume 2015, Article ID 632021, 13 pages • 2015
Open publicationDesign and performance evaluation of wear test jig for aluminium alloy substrate in hydraulic fluid
Authors: Ajibola O.O,, Oloruntoba D. T., Adewuyi B.O
African Corrosion Journal, Vol. 1 No. 1, 2015. pp 46-51 • 2015
High Molecular-weight Polymer flocculation Treatment of waste water and sludge from local mineral processing plant.
Authors: Ajibola O.O and Jimoh B.O
Journal of Chemical and Pharmaceutical Research, 2014, 6(7): 1554-1559. • 2014
Open publicationAgitation leaching recovery of lead and zinc from complex sulphide ore deposit using HF, HCl and H2SO4.
Authors: Ajibola O.O. and Jimoh B.O
Advances in Applied Science Research, 5(3), 68-72. • 2014
Metallurgical study of cast aluminium alloy used in hydraulic master brake calliper.
Authors: Ajibola O.O, Oloruntoba D.T and Adewuyi B.O
International Journal of Innovation and Scientific Research. 8(2):324-333. • 2014
Open publicationEffect of hard surface grinding and activation on electroless-nickel plating on cast aluminium alloy substrates
Authors: Ajibola O.O, Oloruntoba D.T and Adewuyi B.O
Hindawi Publishing Corporation. Journal of Coatings. Volume 2014, Article ID 841619, • 2014
Open publicationWear behaviour of sand cast eutectic Al-Si alloy in hydraulic brake fluid
Authors: Ajibola O.O, Adewuyi B.O and Oloruntoba D.T
International Journal of Innovation and Applied Studies. 6 (3): 420-430. • 2014
Open publicationEffects of polishing grades and Saccharin-550 additive on copper electroplating on NST60Mn and NST50-2 steels.
Authors: Ajibola O.O and Oloruntoba D.T
International Journal of Innovation and Scientific Research. 8(2): 334-344 • 2014
Open publicationPhoto Gallery / Picture Evidence
